Process and joint quality of ultrasonic vibration enhanced friction stir lap welding

In order to improve the process effectiveness and joint quality, ultrasonic vibrations were integrated with friction stir lap welding. Effect of ultrasonic exertion on the process and joint quality of AA 6061-T6 were investigated. Upon ultrasonic exertion, joints owned larger effective lap width, shorter hooks and improved strength. Weld fracture mode changed from a ductile–brittle mixed mode to a more ductile mode while the fracture path shifted from lap interface to beyond the stir zone. Material flow and interface defects were characterised using lap welded dissimilar aluminium alloy joints. Ultrasonic vibration improved the material flow and reduced the interfacial defects. Variations in failure load of joints were found in accordance with the variations in material flow and interfacial defects.     

Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs

A novel low-temperature sealing method was developed to seal solid oxide fuel cells. The 3D Ni nanosheet array was pre-fabricated on faying surfaces of Crofer22APU interconnect and NiO-YSZ anode-support. Then it was covered with Au film without changing its morphology. This special nanostructure improved sintering efficiency between Ag nanoparticles and substrates. A dense joint was obtained at the low-temperature between 250 °C–300 °C. This method effectively avoided the oxidation of interconnect during sealing. When joints were sealed at 300 °C, the shear strength reached 16 MPa. The fracture was mainly located in the central Ag layer, presenting a significant plastic deformation. Due to the effective protection of Ni layer, joints also possessed excellent oxidation resistance in oxidizing atmosphere at 800 °C for 400 h. After high-temperature oxidation, the shear strength was increased to 23 MPa, revealing an increasement of 43.8% compared with the as-sealed condition (16 MPa). This sealing method has great potential in sealing solid oxide fuel cells. It also can be extended to seal other energy-conversion devices.     

Real-Time Path Planning Based on the Situation Space of UCAVs in a Dynamic Environment

This paper aims to find a reliable, collision-free path in a dynamic environment for highly maneuverable unmanned combat air vehicles (UCAVs). Given the real-time nature of the operational scenario, quick and adaptable reactions of UCAVs are necessary for updates in situational awareness. Therefore, we propose a three dimensional (3D) path planning approach based on the situational space to provide the tactical requirements of UCAVs for tracking targets and avoiding collisions. First, to ensure reliable nonlinear measurements, the interacting multiple model (IMM) algorithm based on a cubature Kalman filter (CKF) is chosen for the tracking and prediction algorithm. A constraint reference frame combining the kinematic model of constant acceleration (CA) is developed to solve the problem of arrival point generation. Second, by analyzing the relative motion between the UCAV and the moving objects, we define the situation space and give the corresponding calculation method. In tracking the moving target, the guidance vector contains the fusion information of displacement and velocity. At the same time, taking advantage of the one-step situation space as the judgment of the threat, we further plan the collision avoidance strategy. Third, as the safety in a practically reachable trajectory of the UCAV possesses the absolute priority, the collision avoidance acceleration accounts for this dominant factor in path planning. Simulations and experimental results prove that the proposed approach can plan a smooth and flyable path in 0.008 s under the premise of soft-landing target tracking.     

基于数值微分核脉冲信号数字处理方法

核反应堆核测量系统测量探测器输出的核脉冲信号，该信号后沿拖尾很长，在计数率较高时容易产生信号堆积和基线漂移等问题，导致源区计数率测量上限仅能达到105 Hz左右。文中基于数值微分方法，采用数字处理技术，在时域上分析了核脉冲信号经过前置放大、信号成形、低通滤波和脉冲甄别后的输出，并利用探测器实测信号进行了仿真。仿真结果表明，基于数值微分的数字处理方法可以实现相邻0.4 μs脉冲信号的识别和测量，将源区测量计数率上限提升到2×106 Hz以上。      

An Artificial Skyrmion Platform with Robust Tunability in Synthetic Antiferromagnetic Multilayers

Magnetic skyrmions are topologically nontrivial spin structures, and their existence in ferromagnetically coupled multilayers has been widely reported with a disordered arrangement. Here, a nucleation scenario of ordered skyrmions in nanostructured synthetic antiferromagnetic (SAF) multilayers is proposed and experimentally demonstrated using direct magnetization imaging, indirect magnetometer and magnetoresistance measurement, and micromagnetic simulation. Instead of relying on Dzyaloshinskii–Moriya interaction, the antiferromagnetic interlayer exchange coupling in the SAF multilayers fulfills the role of nucleation and stabilization of skyrmions. The robustness of the proposed skyrmion nucleation scenario is examined against temperature from 4.5 to 300 K and device size from 400 to 1200 nm. Interestingly, these synthetic skyrmions still behave well with a size less than 100 nm. The higher stability than generic magnetic domains can be attributed to topological protection. The results thus provide an artificial skyrmion platform to meet the functional needs of high density and designable arrangement in magnonic and spintronic applications.     

Better Realization of Mobile Cloud Computing Using Mobile Network Computers

Wireless Personal Communications - In this paper, we first briefly explain why mobile network computers should be used as mobile terminals based on the concept of mobile network computer and cloud...     

Epigenetic Regulation of the Hippocampus,with Special Reference to Radiation Exposure

The hippocampus is crucial in learning, memory and emotion processing, and is involved in the development of different neurological and neuropsychological disorders. Several epigenetic factors, including DNA methylation, histone modifications and non-coding RNAs, have been shown to regulate the development and function of the hippocampus, and the alteration of epigenetic regulation may play important roles in the development of neurocognitive and neurodegenerative diseases. This review summarizes the epigenetic modifications of various cell types and processes within the hippocampus and their resulting effects on cognition, memory and overall hippocampal function. In addition, the effects of exposure to radiation that may induce a myriad of epigenetic changes in the hippocampus are reviewed. By assessing and evaluating the current literature, we hope to prompt a more thorough understanding of the molecular mechanisms that underlie radiation-induced epigenetic changes, an area which can be further explored.     

浮法玻璃熔窑火焰空间石油焦部分替代重油燃烧的数值模拟

针对浮法玻璃熔窑火焰空间建立模型并进行了数值模拟，在保证热值相同的前提下，对比研究了重油燃烧及将石油焦部分替代重油燃烧时的流场分布特征。结果表明，石油焦部分代替重油燃烧后，两种燃料可很好地混合燃烧，窑炉内温度制度基本不受影响；石油焦着火时间比重油长，两种燃料混合燃烧时平均着火点滞后于仅使用重油时，且燃烧路径更长，燃烧时产生了大量CO，整个火焰空间及烟气出口处NOx的平均排放量与仅使用重油相比降低了30.02%，NOx减排效果明显。